I have a water boss 900 for the last 3 years and my water pressure has dropped, waterboss said I need to change the resin is this a good idea or should I buy a new water softner I have a height problem where I can put a new softner it cannot exceed 36 inches and cost is a factor aswell
Re: Can anyone help me
[re: Giranger]
07/06/08 11:39 AM
Edit
Reply
After a period of time the resin can get clogged by acting as a filter and then channel effectively losing much area of surface contact.
The resin can be changed or it can be cleaned. Sometimes it degrade from abrasion.
Cleaning is simple. Just a matter of taking it out of the canister and placing in a tub with water to get all the accumulated crud out. It can also be done in place by lancing, backwashing and using air to get the resin back to individual particles. Doing this too vigorously can flush resin out the overflow.
The unit itself should not have to be replaced as the resin is the acting agent in the chemical reaction. Newer units may have more economical controllers depending on what you pay.
CountryByNet.com is a ByNet Network Website
Reproduction of any part without written permission is strictly prohibited
Copyright 2008 CountryByNet.com :: User Agreement
Previous
Index
Next
Flat
Threaded
Edit
Reply
[