Country Projects  :: Barns/Buildings
Related Links:
Pages: 1
JoeR
Silver Member

Reged: 09/11/02
Posts: 207
Loc: St.Cloud, FL
Hitching Post
      03/09/03 02:32 PM

Anybody have a good idea for building a hitching post. I was going to use 6" round posts from Tractor supply, but I couldn't remember a good way to secure the horizontal post across the two vertical posts.

Thanks,

Joe


Post Extras: Print Post   Remind Me!   Notify Moderator  
egon
Veteran Member

Reged: 09/12/02
Posts: 3031
Loc: Nova Scotia,Canada
Re: Hitching Post new [re: JoeR]
      03/09/03 03:59 PM

Round out the top of the two vertical posts, lay on the horizonal post and use 1x1/4 metal strapping with lag bolts or a through bolt to hold it all together. Lots of other ways too.

Blind mortice and tenon.

Egon

Post Extras: Print Post   Remind Me!   Notify Moderator  
cowboydoc
Veteran Member

Reged: 09/11/02
Posts: 642
Re: Hitching Post new [re: egon]
      03/09/03 07:14 PM

I agree with Egon. You have to make sure that they can't pull that top rail off. I also use 12" spikes to drive down through them if I use 6x6's. I put the 6x6's in the ground 4' and then lay the horiz. 6x6 on top of that and put a couple 12" spikes through them. Then I anchor the back with a 2x6.

Post Extras: Print Post   Remind Me!   Notify Moderator  
JoeR
Silver Member

Reged: 09/11/02
Posts: 207
Loc: St.Cloud, FL
Re: Hitching Post new [re: cowboydoc]
      03/09/03 08:46 PM

Now that I have read the ideas, I think the 6x6's would be easier than the round posts... Just thinking about the 6x6's makes my back feel sore!

Joe


Post Extras: Print Post   Remind Me!   Notify Moderator  
cowboydoc
Veteran Member

Reged: 09/11/02
Posts: 642
Re: Hitching Post new [re: JoeR]
      03/10/03 02:25 PM

Yea I'd go with 6x6's. They may be heavier but it's alot easier to do with them. You don't have to worry about carving out the top or your posts either. I've had 1500 lb. horses try and break free from mine and they haven't succeeded.

Post Extras: Print Post   Remind Me!   Notify Moderator  
calpyro
New Member

Reged: 03/17/03
Posts: 1
Re: Hitching Post new [re: cowboydoc]
      03/17/03 12:04 AM

I made one out of 2" iron pipe and sunk it in concrete. I have draft horses and I dosen't budge

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
0 registered and 2 anonymous users are browsing this forum.

Moderators:  Muhammad, MikePA, Harv, JohnMiller3 

Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      Markup is enabled
Jump to



TOP
CountryByNet.com is a ByNet Network Website
Reproduction of any part without written permission is strictly prohibited
Copyright 2008 CountryByNet.com :: User Agreement